TFE3S Topics

Day 1 (Morning) — June 26, 2017

Session 1: Thin films for energy storage and energy harvesting

Chairs: Dr. Dionne Hernandez-Lugo, NASA Glenn Research Center, and Dr. Jitendra Kuman, University of Dayton Research Institute

Session 1A

  • 10:30 a.m. - Dr. Yu Zhu, University of Akron, Advanced silicon composite anodes for lithium ion batteries
  • 11:00 a.m. - Dr. Vijay Singh, University of Kentucky, Nanowire device configurations for enhanced performance in CdTe based solar cells
  • 11:30 a.m. - Professor Je-Hyeong Bahk, University of Cincinnati, High performance nanostructured thin films and composites for efficient thermoelectric energy harvesting

Session 2: Thin film microelectronics

Chairs: Professor Marc Cahay, University of Cincinnati, and Dr. Terry Murray, CETRASE, University of Dayton

Session 2A

  • 10:30 a.m. - Dr. David Look, Semiconductor Research Institute, Wright State University, Electrical and optical characterization of transparent conductive oxide films
  • 11:00 a.m. - Dr. Bruce Claflin, Air Force Research Lab Sensors Directorate, Group-IV semiconductor Alloy thin films containing tin: Synthesis and applications
  • 11:30 a.m. - Professor Savas Kaya, Ohio University, Low cost multiscale patterning via photo-initiated PMMA for thin-film devices
Day 1 (Afternoon) — June 26, 2017

Session 1: Thin films for energy storage and energy harvesting

Chairs: Dr. Dionne Hernandez-Lugo, NASA Glenn Research Center, and Dr. Jitendra Kuman, University of Dayton Research Institute

Session 1B

  • 1:15 p.m. - Professor Vesselin Shanov, University of Cincinnati, CVD synthesis, characterization and applications of three dimensional (3D) graphene for advanced applications
  • 1:45 p.m. - Dr. Paul Matter, pH Matter LLC, 3-dimensional current collector for energy storage applications
  • 2:15 p.m. - Dr. Shailendra K. Jha, CECRI, India

Session 2: Thin film microelectronics

Chairs: Professor Marc Cahay, University of Cincinnati, and Dr. Terry Murray, CETRASE, University of Dayton

Session 2B

  • 1:15 p.m. - Dr. Vamsy Chodavarapu, CETRASE, University of Dayton, CloudMEMS: Cybermanufacturing of micro-electro-mechanical systems
  • 1:45 p.m. - Dr. Andrew Green, Air Force Research Lab, Sensors Directorate, Ga2O3 based MOSFETs
  • 2:15 p.m. - Dr. Parag Banerjee, St. Louis University, Atomic layer deposition from surface science engineering

Session 3 : Multifunctional oxides and multiferroics

Chairs: Chonglin Chen, University of Texas, San Antonio, and Nian Sun, Northeastern University

  • 3:00 p.m. - Dr. Brandon Howe, AFRL Materials and Manufacturing Directorate, Next-generation electronic materials processing tools newly developed at AFRL
  • 3:30 p.m. - Professor Yan Zhuang, Wright State University, Magnetic thin films for Si RF technology
  • 4:00 p.m. - Professor Andrew Sarangan, CETRASE University of Dayton, Electrical and optical properties of vanadium dioxide phase change thin films produced by ion-assisted reactive evaporation

Session 4: Organic and biological thin films

Chairs: Professor Wen Li, Michigan State University, and Professor Karolyn Hansen, CETRASE, University of Dayton

  • 3:15 p.m. - Dr. Wen Li, Michigan State University, Hybrid diamond-polymer thin film electrodes for neurotransmitter sensing
  • 3:30 p.m. - Professor Karolyn Hansen, CETRASE, University of Dayton, Nanostructured surfaces for biological sensing applications 
  • 4:00 p.m. - Thin film organic light emitting and detecting devices
  • 4:15 p.m. - Hybrid manufacturing and integration of devices
Day 2 (Morning) — June 27, 2017

Session 5: Flexible and printable electronics

Chairs: Dr. Carrie Bartsch and Dr. Emily Heckman, Air Force Research Laboratory, Sensors Directorate

Session 5A

  • 10:30 a.m. - Professor Jay Guo, University of Michigan, Thin film structures for light filtering and energy related applications
  • 11:00 a.m. - Professor Alkim Akyurtlu, University of Massachusetts, Lowell, Additive manufacturing for RF and microwave devices
  • 11:30 a.m. - Recent 3D printing research activities at Michigan State University

Session 6: Thin films of phase change materials and sensors

Chairs: Professor Nelson Sepúlveda, Michigan State University, and Dr. Weisong Wang, CETRASE, University of Dayton

Session 6A

  • 10:30 a.m. - Professor Punit Boolchand, University of Cincinnati, Amorphous Telluride based phase change materials and network rigidity
  • 11:00 a.m. - Professor Ron Coutu, Marquette University, Electronic control Germanium Telluride (GeTe) phase transition for electronic memory applications
  • 11:30 a.m. - Professor Nelson Sepúlveda, Michigan State University, Wavelength-selective microactuators and thin flexible microphone/loudspeaker devices
Day 2 (Afternoon) — June 27, 2017

Session 5: Flexible and printable electronics

Chairs: Dr. Carrie Bartsch and Dr. Emily Heckman, Air Force Research Laboratory, Sensors Directorate

Session 5B

  • 1:45 p.m. - Professor David Estrada, Boise State University, Emerging materials for aerosol jet printing
  • 2:15 p.m. - Dr. Carrie Bartsch, Air Force Research Laboratory, Sensors Directorate, Overview of research on printable electronics at AFRL Sensors Directorate
  • 2:45 p.m. - A hybridized approach to soft electronics

Session 6: Thin films of phase change materials and sensors

Chairs: Professor Nelson Sepúlveda, Michigan State University, and Dr. Weisong Wang, CETRASE, University of Dayton

Session 6B

  • 1:15 p.m. - Professor Kaushik Dayal, Carnegie Mellon University,Multiscale modeling and computation for functional thin films

Session 7: Meta-materials and optical thin films

Chairs: Professor Partha Banerjee, and Professor Joseph Haus, CETRASE, University of Dayton

  • 1:15 p.m. - Dr. Carl Liebig, Air Force Research Lab, Materials and Manufacturing Directorate, Ultrafast laser precipitation of electrooptic materials and structures in glass
  • 1:45 p.m. - Professor Sergei Lyuksyutov, University of Akron, Modifications of Si (100) using atomic force microscopy in the presence of propan-2-ol, butan-2-ol or toluene
  • 2:15 p.m. - Dr. Chenlong Zhao, CETRASE, University of Dayton, Manipulate light and particles on a surface based on optothermally generated surface bubbles
  • 2:45 p.m. - Professor Jay Mathews, University of Dayton, Germanium-tin thin film alloy materials for silicon photonic devices

Contact

CETRASE

Kettering Lab 341 
300 College Park 
Dayton, Ohio 45469 - 0232

937-229-3611 

Connect